Wire-on-Tube Condenser

Specifications: 1) Raw material: a) Rolling welded steel tube: 4.76 ~ 6.35 x 0.71 b) Low carbon steel wire: 1.4 ~ 1.6mm c) Bracket: steel plate SPCC thickness 0.6~2.0 d) base mounting plate: SPCC thickness 0.6~2.02) Technical standards: can produce according to clients' drawing or samples3) Performance: a) Surface with electrophoresis coating to prevent the corrosion b) Inner cleanness can meet the requirement of R134a and CFC cooling system c) Can satisfy the cooling capability requirementsStructure:1) Flat type of wire on tube condenser used at the back2) Bended or spiral type of wire on tube condenser used at the bottom3) Wrapped type of tube embed on plate4) Flat type of louvre condenser used at the backR134a cooling system tube inside standard:1) Residual moisture: ≤20mg/m²2) Residual dusty: ≤30mg/m²3) Residual mineral oil: ≤7mg/m²4) Residual chlorine: ≤3mg/m²5) Sealing density: ≥1.65Mpa Specification o
Wire-on-Tube Condenser